The SI-Card11 belongs to the third generation of SI-Cards. SI-Cards11 register the data record in 60 ms. This is twice as fast as SI-Card8/9, the most advanced SI-Cards so far.
In general SI-Card11 offers a more smart user experience. SI-Card11 features an integrated electronic module. There is an optical feedback signal (flashing LED) indicating the finished time registration process. There is exactly one feedback signal cycle from the SI-Station. Then next 11 feedback signals will be transmitted by the SI-Card within 5 seconds. The number and the rhythm of the optical feedback signal can be configured by the user. There is an input mask in “SI-Config”.
SI-Card11 feedback signals are powered by battery. Power consumption is very low. Based on calculations there is enough power to activate up to 30,000 flashing cycles. The SI-Card11 features a fall back option. If the battery is empty the device works like the passive SI-Card10. So any risk is eliminated.
SI-Card11 comes with a chromium plated tip and transparent body. The flashing LED illuminates the SI logo in the tip and emits into the transparent body.
|Model type||Finger stick|
|Number range||9 000 001 ... 9 999 999|
|Typical application||Orienteering, adventure and outdoor sports|
|Data exchange time||60 ms|
|Clear time||< 0.5 s|
|Registration feedback signal||Optical (LED)|
|Special records||CLEAR, CHECK, START, FINISH|
|Time format||24h-format, day of week, counter for up 4 weeks|
|SI-System compatibility, Firmware stations||SI-Stations BSF7/8, firmware V5.74 and higher|
|Operating range||-20°C ... +50°C|
|Protection class||IP 67 (DIN EN 60529)
– Protection against penetration of dust
– Protection against the ingress of water during short-term immersion
|Battery life time||Up to 30 000 flashing cycles|
|Warranty||5 years, except battery|
|Dimensions||71 mm x 19 mm x 8 mm|
|Colours||Transparent body, chromium plated tip with logo|
|Customer services||Online reservation service|